Configuration Guide Global IP-MAC Binding Commands
The following example displays global IPv4 address-MAC address binding.
Ruijie#show address-bind
Total Bind Addresses in System : 1
IP Address Binding MAC Addr
--------------- ----------------
192.168.5.1 00d0.f800.0001
Total Bind Addresses in System
IPv4 address-MAC address binding count
Enables IP address-MAC address binding.
7.7 show address-bind uplink
Use this command to display the exception port.
The following example displays the exception port.
Ruijie#show address-bind uplink
Port State
---------- ---------
Gi0/1 Enabled
Default Disabled
Short for exception ports. All ports are
non-exception ports by default.
To Next Page
Loading...
Need help?
General