Configuration Guide CPU Protection Commands
A default integer that varies with products, indicating the queue
priority.
Displays configurations and statistics of all priority queues.
As a single physical device, there is no device parameter; As a VSU,
the device parameter indicates the chassis or the box-type device. If
no device parameter is specified, that indicates this command takes
effect to the master chassis or the master box-type device.
To the box-type device, there is no slot parameter.
To the chassis device, the slot parameter indicates the line card of
the master chassis. If no slot parameter is specified, that means the
command will clear all node statistics in the system. If you want to
clear the statistics of a specific node, both the device parameter and
the slot parameter will be required.
The following example displays the summarized configuration and statistics of priority queues.
Ruijie#show cpu-protect traffic-class all
Traffic-class Bandwidth(pps) Rate(pps) Drop(pps)
------------- -------------- --------- ---------
0 8000 0 0
1 8000 0 0
2 8000 0 0
3 8000 0 0
4 8000 0 0
5 3200 0 0
6 8000 0 0
7 8000 0 0
To Next Page
Loading...
Need help?
General