Configuration Guide CPU Protection Commands
13.12 show cpu-protect type
Use this command to display the statistics of the specified type of packets
show cpu-protect type packet-type [ device device_num ] [ slot slot_num]
Packet type, which varies with products
Displays the configurations and statistics of all packet types.
As a single physical device, there is no device parameter; As a VSU,
the device parameter indicates the chassis or the box-type device. If
no device parameter is specified, that indicates this command takes
effect to the master chassis or the master box-type device.
To the box-type device, there is no slot parameter.
To the chassis device, the slot parameter indicates the line card of
the master chassis. If no slot parameter is specified, that means the
command will clear all node statistics in the system. If you want to
clear the statistics of a specific node, both the device parameter and
the slot parameter will be required.
The following example displays the statistics of the ICMP packets.
Ruijie(config)#show cpu-protect type icmp
Packet Type Traffic-class Bandwidth(pps) Rate(pps) Drop(pps)
Total Total Drop
------------------ ------------- -------------- --------- ---------
-------- ----------
icmp 5 1500 50 0 10000
100
To Next Page
Loading...
Need help?
General