Ruijie RG-S29 Series

Configuration Guide DHCPv6 Snooping Commands
DHCPv6 snooping vlan: 1-4094
DHCPv6 snooping database write-delay time: 0 seconds
DHCPv6 snooping option 18/37 status: ENABLE
DHCPv6 snooping link detection :DISABLE
Interface Trusted Filter DHCP
---------------------- ------- ---------
FastEthernet0/10 yes DISABLE
Related
Commands
Command
Description
show ipv6 dhcp snooping
Displays the configuration information of the
DHCPv6 Snooping.
Platform
Description
N/A
15.10 ipv6 dhcp snooping information option format remote-id
Use this command to add option37 remote-id customized character string into the DHCPv6 request
packets.
Use the no form of this command to restore the default setting.
ipv6 dhcp snooping information option format remote-id [ string ascii-string | hostname ]
no ipv6 dhcp snooping information option format remote-id [ string ascii-string | hostname ]
Parameter
Description
Parameter
Description
string ascii-string
The content of Option37 remote-id extension format is customized
character string.
hostname
The content of Option37 remote-id extension format is hostname.
Defaults
This function is disabled by default.
Command
Mode
Global configuration mode
Usage Guide
With this command configured, the option37 remote-id will be added to the DHCPv6 request packets
with the content as the customized and the DHCPv6 server will assign the addresses according to the
option37 information.
Configuration
Examples
The following example adds the option37 remote-id to the DHCPv6 request packets with the content
being hostname.
Ruijie# configure terminal
Ruijie(config)# ipv6 dhcp snooping information option format remote-id
hostname