Ruijie RG-S29 Series User Manual

Configuration Guide DHCPv6 Snooping Commands
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
15.11 ipv6 dhcp snooping link-detection
Use this command to clear the dynamic binding entry on an interface when the interface links down.
Use the no form of this command to restore the default setting.
ipv6 dhcp snooping link-detection
no ipv6 dhcp snooping link-detection
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
This function is disabled by default.
Command
Mode
Global configuration mode
Usage Guide
By default, the dynamic binding entries are not cleared on a wired interface when the interface links
down. With this function enabled, the dynamic binding entries are auto-cleared on an interface when
the interface is in the LINK DOWN status.
Configuration
Examples
The following example clears the dynamic binding entry on a wired interface when the interface is in
the LINK DOWN status.
Ruijie# configure terminal
Ruijie(config)# ipv6 dhcp snooping link-detection
Related
Commands
Command
Description
show ipv6 dhcp snooping
Displays the configuration information of the
DHCPv6 Snooping.
Platform
Description
N/A

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English