Ruijie RG-S29 Series

Configuration Guide NFPP Commands
Description
21.11 clear nfpp arp-guard scan
Use this command to clear ARP scanning table.
clear nfpp arp-guard scan
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode
Usage Guide
N/A
Configuration
Examples
The following example clears ARP scanning table.
Ruijie# clear nfpp arp-guard scan
Related
Commands
Command
Description
arp-guard attack-threshold
Sets the global attack threshold.
nfpp arp-guard policy
Sets the attack threshold.
show nfpp arp-guard scan
Displays the ARP scanning table.
Platform
Description
N/A
21.12 clear nfpp define name hosts
Use this command to clear the monitored hosts. If the host is isolated, you need to release it.
clear nfpp define name hosts [ vlan vid ] [ interface interface-id ] [ ip-address ] [ mac-address ]
[ ipv6-address ]
Parameter
Description
Parameter
Description
name
Defines guard name
vid
VLAN ID
interface-id
Interface name
ip-address
IP address
ipv6-address
IPv6 address