Configuration Guide NFPP Commands
Use this command without the parameter to clear all monitored hosts in the self-defined range.
The following example clears the monitored hosts.
Ruijie# clear nfpp define tcp hosts vlan 1 interface g 0/1
Displays the isolated hosts.
21.13 clear nfpp dhcp-guard hosts
Use this command to clear the DHCP monitored hosts, that it, release them from isolation.
clear nfpp dhcp-guard hosts [ vlan vid ] [ interface interface-id ] [ mac-address ]
Sets the interface name and number.
Use this command without the parameter to clear all monitored hosts.
The following example clears the DHCP monitored hosts.
Ruijie# clear nfpp dhcp-guard hosts vlan 1 interface g0/1
dhcp-guard attack-threshold
Sets the global attack threshold.
Sets the limit threshold and attack threshold.
To Next Page
Loading...
