Configuration Guide NFPP Commands
show nfpp dhcp-guard hosts
Displays the monitored host.
21.14 clear nfpp dhcpv6-guard hosts
Use this command to clear the DHCPv6 monitored host isolation.
clear nfpp dhcpv6-guard hosts [ vlan vid ] [ interface interface-id ] [ mac-address ]
Sets the interface name and number.
Use this command without the parameter to clear all monitored hosts
The following example clears the DHCPv6 monitored hosts.
Ruijie# clear nfpp dhcpv6-guard hosts vlan 1 interface g0/1
dhcpv6-guard attack-threshold
Sets the global attack threshold.
Sets the limit threshold and attack threshold.
show nfpp dhcpv6-guard hosts
Displays the monitored host.
21.15 clear nfpp icmp-guard hosts
Use this command to clear the ICMP monitored hosts.
clear nfpp icmp-guard hosts [ vlan vid ] [ interface interface-id ] [ ip-address ]
To Next Page
Loading...
