Configuration Guide NFPP Commands
Sets the interface name and number.
Use this command without the parameter to clear all monitored hosts.
The following example clears the ICMP monitored hosts.
Ruijie# clear nfpp icmp-guard hosts vlan 1 interface g0/1
icmp-guard attack-threshold
Sets the global attack threshold.
Sets the limit threshold and attack threshold.
show nfpp icmp-guard hosts
Displays the monitored host.
21.16 clear nfpp ip-guard hosts
Use this command to clear the monitored host isolation.
clear nfpp ip-guard hosts [ vlan vid ] [ interface interface-id ] [ ip-address ]
Sets the interface name and number.
Use this command without the parameter to clear all monitored hosts.
The following example clears the monitored host isolation.
Ruijie# clear nfpp ip-guard hosts vlan 1 interface g0/1
To Next Page
Loading...
