Command Reference SYS Commands
watermark(85%),current cpu usage 100%
When the CPU usage is less than the lower limit of the high watermark, the system will print the following
message about warning release:
*Jan 20 07:02:52: %RG_SYSMON-5- CPU_WATERMARK:withdraw warning! system cpu usage below high
watermark(85%), current cpu usage 36%
Use this command to clear the history of the memory usage.
memory history clear [ one-forth | half | all ]
Clears one fourth entries.
Clears a half of entries.
Global configuration mode
The following example clears a half of the history of the memory usage.
Ruijie# show memory history
Time Thu Jan 1 00:24:45 1970
Used(k) 148516
Maxinum memory users for this period
Process Name Holding
tcpip.elf 270028
cli-memory 60600
rg_syslogd 36640
Time Thu Jan 1 00:24:41 1970
Used(k) 148492
Maxinum memory users for this period
Process Name Holding
To Next Page
Loading...
Need help?
General