Configuration Guide NFPP Commands
21.94 show nfpp ip-guard hosts
Use this command to display the monitored host.
show nfpp ip-guard hosts [statistics | [[vlan vid] [interface interface-id] [ip-address]]]
Displays the statistical information of the monitored host.
The following example displays the monitored host.
Ruijie# show nfpp ip-guard hosts statistics
success fail total
------- ---- -----
100 20 120
The following example displays the monitored host.
Ruijie#show nfpp ip-guard hosts
If column 1 shows '*', it means "hardware do not isolate host" .
VLAN interface IP address Reason remain-time(s)
---- -------- --------- ------- -------------
1 Gi0/1 1.1.1.1 ATTACK 110
2 Gi0/2 1.1.2.1 SCAN 61
Total:2 host(s)
clear nfpp ip-guard hosts
Clears the monitored host.
21.95 show nfpp ip-guard summary
Use this command to display the configuration.