Command Reference ACL Commands
Extended IP ACL: 100 to 199. 2000 to 2699.
Extended MAC ACL: 700 to 799.
Extended Expert ACL: 2700 to 2899.
Comment that describes the access list entry.
The access list entries have no remarks by default.
Global configuration mode
You can use this command to write a helpful comment for an entry in a specified access list. If the
specified access list does not exist, the command will create the access list, then add remarks for the
access entry.
The following example writes a comment for an entry in ACL102.
Ruijie(config)# access-list 102 remark deny-host-10.1.1.1
Displays all access lists, including the remarks
for the access list entries.
Displays the access list of a specified number,
including the remarks for the access list entry.
Displays the access list of a specified name,
including the remarks for the access list entry.
1.5 clear access-list counters
Use this command to clear counters of packets matching the deny entries in ACLs.
clear access-list counters [id | name]