Ruijie RG-S29 Series - Page 1307

Command Reference ACL Commands
10 deny host 192.168.4.12
Ruijie(config-ext-nacl)#exit
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# ip access-group 34 in
This example shows how to use the extended IPV6 ACL. The purpose is to deny the host with the IP
address 192.168.4.12 and apply the rule to Interface gigabitethernet 1/1. The configuration procedure
is as below:
Ruijie(config)#ipv6 access-list extended v6-acl
Ruijie(config-ipv6-nacl)#11 deny ipv6 host 192.168.4.12 any
Ruijie(config-ipv6-nacl)#show access-lists
ipv6 access-list extended v6-acl
11 deny ipv6 host 192.168.4.12 any
Ruijie(config-ipv6-nacl)# exit
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# ipv6 traffic-filter v6-acl in
Related
Commands
Command
Description
show access-lists
Displays all ACLs.
ipv6 traffic-filter
Applies the extended IPv6 ACL on the
interface.
ip access-group
Applies the IP ACL on the interface.
mac access-group
Applies the extended MAC ACL on the
interface.
ip access-list
Defines an IP ACL.
mac access-list
Defines an extended MAC ACL.
expert access-list
Defines an extended expert ACL.
ipv6 access-list
Defines an extended IPv6 ACL.
permit
Permits the access.
Platform
Description
N/A
1.8 expert access-group
Use this command to apply the specified expert access list globally or on the specified interface. Use
the no form of the command to remove the application.
expert access-group { id | name } { in | out }
no expert access-group { id | name } { in | out }
Parameter
Description
Parameter
Description
id
Expert access list number: 2700 to 2899