Ruijie RG-S29 Series - Page 1308

Command Reference ACL Commands
name
Name of the expert access list
in
Specifies filtering on inbound packets.
out
Specifies filtering on outbound packets.
Defaults
No expert access list is applied globally or on the interface.
Command
mode
Global or interface configuration mode.
Usage Guide
This command is used to apply the specified access list globally or on the interface to control the input
and output data streams. Use the show access-group command to view the setting.
Configuration
Examples
The following example shows how to apply the access-list accept_00d0f8xxxxxx only to Gigabit
interface 0/1:
Ruijie(config)# interface GigaEthernet 0/1
Ruijie(config-if)# expert access-group
accept_00d0f8xxxxxx_only in
Related
Commands
Command
Description
show access-group
Displays the ACL configuration.
Platform
Description
N/A
1.9 expert access-list advanced
Use this command to create an advanced expert access list and place the device in expert advanced
access list configuration mode. Use the no form of this command to remove the advanced expert
access list.
expert access-list advanced name
no expert access-list advanced name
Parameter
Description
Parameter
Description
name
Name of the advanced expert access list
Defaults
N/A
Command
mode
Global configuration mode
Usage Guide
Use this command to create an advanced expert access list (namely, ACL80) to match your custom
fields.