Ruijie RG-S29 Series - Page 1321

Command Reference ACL Commands
the interval of ACL logging output. The interval ranges from 0 to 1440
minutes, and the default value is 5 minutes, indicating that the ACL
matching log of a specific flow is output every 5 minutes. 0 indicates
that no ACL logging is output.
Defaults
By default, it is 5 minutes.
Command
mode
Global configuration mode
Usage Guide
Use this command to configure the interval at which the IPv6 access list log is updated.
Configuration
Examples
The following example configures the interval for the IPv6 access list log update to 10 minutes:
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# ipv6 access-list log-update interval 9
Related
Commands
Command
Description
ipv6 access-list
Defines an IPv6 access list.
deny
Defines the deny access entries.
permit
Defines the permit access entries.
show running
Displays the running configurations of the
device.
Platform
Description
N/A
1.24 ipv6 access-list resequence
Use this command to resequence an IPv6 access list. Use the no form of this command to restore the
default order of access entries.
ipv6 access-list resequence name start-sn inc-sn
no ipv6 access-list resequence name
Parameter
Description
Parameter
Description
name
Name of the IPv6 access list
start-sn
Start sequence number. Range: 1 to 2147483647
inc-sn
Increment of the sequence number. Range: 1 to 2147483647
Defaults
start-sn: 10
inc-sn: 10