Command Reference ACL Commands
Name of the IPv6 access list.
Global configuration mode
Use this command to enable the counter of packets matching the IPv6 access list to monitor the IPv6
packets matching and filtering.
The following example enables the counter of packets matching the IPv6 access list named v6-acl:
Ruijie(config)# ipv6 access-list v6-acl
Ruijie(config-ipv6-nacl)# show access-lists
ipv6 access-list acl-v6
10 permit icmp any any (7 matches)
20 deny tcp any any (7 matches)
The following example disables the counter of packets matching the IPv6 access list named v6-acl:
Ruijie(config)#no ipv6 access-list v6-acl counter
Ruijie(config-ipv6-nacl)# show access-lists
ipv6 access-list acl-v6
10 permit icmp any any
20 deny tcp any any
Displays all access lists.
1.23 ipv6 access-list log-update interval
Use this command to configure the interval at which the IPv6 access list log is updated. Use the no
form of this command to restore the default interval.
ipv6 access-list log-update interval time
no ipv6 access-list log-update interval
For the access rule with the logging option, a packet hit is output at
To Next Page
Loading...
