Ruijie RG-S29 Series - Page 1319

Command Reference ACL Commands
show access-lists
Displays all access lists..
Platform
Description
N/A
1.21 ipv6 access-list
Use this command to create an IPv6 access list and to place the device in IPv6 access list
configuration mode. Use the no form of this command to remove the access list.
ipv6 access-list name
no ipv6 access-list name
Parameter
Description
Parameter
Description
name
Name of the IPv6 access list.
Defaults
N/A
Command
mode
Global configuration mode
Usage Guide
To filter the IPv6 packets through the access list, you need to define an IPv6 access list by using the
ipv6 access-list command.
Configuration
Examples
The following example creates an IPv6 access list named v6-acl:
Ruijie(config)# ipv6 access-list v6-acl
Ruijie(config-ipv6-nacl)# show access-lists
ipv6 access-list extended v6-acl
Ruijie(config-ipv6-nacl)#
Related
Commands
Command
Description
show access-lists
Displays all access lists.
Platform
Description
N/A
1.22 ipv6 access-list counter
Use this command to enable the counter of packets matching the IPv6 access list. Use the no form of
this command to disable the counter.
ipv6 access-list counter name
no ipv6 access-list counter name