Ruijie RG-S29 Series

Command Reference QoS Commands
Attached input policy-map
Indicates the policy map applied on the input
virtual group.
Attached output policy-map
Indicates the policy map applied on the output
virtual group.
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
2.26 show policy-map
Use this command to display policy maps.
show policy-map [ policy-map-name [ class class-map-name ] ]
Parameter
Description
Parameter
Description
policy-map-name
Policy map name
class-map-name
Class map name
Defaults
None
Command
Mode
Privileged EXEC mode, global configuration mode, interface configuration mode.
Usage Guide
N/A
Configuration
Examples
The following example displays configuration of policy map “pmap1”.
Ruijie# show policy-map pmap1
Policy Map pmap1
Class cmap1
set ip dscp 16
Class cmap2
police 10240 256 exceed-action dscp 8
Class cmap3
police 512000 4096 exceed-action drop
The fields in the output of this command are described in the following table.