Command Reference QoS Commands
Indicates the policy map name.
Indicates the class map name.
Indicates that the DSCP value is modified in this
example.
Indicates bandwidth limit configuration and the
action policy for the violated packets.
The following example displays the action policy for the traffic of class map “cmap1” in policy map
“pmap1” .
Ruijie#show policy-map pmap1 class cmap1
Class cmap1
set ip dscp 16
Use this command to display the bandwidth configuration.
show qos bandwidth [ interfaces interface-id ]
Privileged EXEC mode, global configuration mode, interface configuration mode.
The following example displays the bandwidth configuration of interface GigabitEthernet 0/1. (Taking
the device supporting the bandwidth configuration of the unicast queue or the multicast queue for
example. )
Ruijie# show qos bandwidth interface gigabitEthernet 0/1
To Next Page
Loading...
Need help?
General