Command Reference Time Range Commands
6.2 periodic
Use this command to configure periodic time.
periodic day-of-the-week time to [ day-of-the-week ] time
Use the no form of this command to remove the configured periodic time.
no periodic day-of-the-week time to [ day-of-the-week ] time
Indicates the week day when the periodic time starts or ends.
Indicates the exact time when the periodic time starts or ends.
No periodic time is configured by default.
Time range configuration mode
Use the periodic command to configure a periodic time interval to allow a certain function to take effect
within the periodic time.
The following example creates a time range and enters time range configuration mode.
Ruijie(config)# time-range no-http
Ruijie(config-time-range)#
The following example configures a periodic time interval.
Ruijie(config-time-range)# periodic Monday 1:1 to Tuesday 2:2
Use the show time-range [ time-range-name ] command to display the time range configuration.
Use this command to display the time range configuration.
show time-range [ time-range-name ]
To Next Page
Loading...
Need help?
General