Ruijie RG-S29 Series

Command Reference VSU Commands
!
Related
Commands
Command
Description
show switch virtual
Displays the domain ID as well as the ID and role of each chassis.
Platform
Description
N/A
7.11 show switch virtual dual-active
Use this command to display the configuration of DAD.
show switch virtual dual-active { bfd | aggregateport | summary }
Parameter
Description
Parameter
Description
bfd
Configuration of BFD-based DAD
aggregateport
Configuration of AP-based DAD
summary
Configuration and status of DAD
Defaults
N/A
Command Mode
Privileged EXEC mode
Usage Guide
N/A
Configuration
Examples
The following example displays the configuration and status of DAD.
Ruijie# show switch virtual dual-active summary
BFD dual-active detection enabled: Yes
Aggregateport dual-active detection enabled: No
Interfaces excluded from shutdown in recovery mode:
GigabitEthernet 1/0/3
GigabitEthernet 1/0/4
In dual-active recovery mode: No
The following example displays the configuration of BFD-based DAD.
Ruijie# show switch virtual dual-active bfd
BFD dual-active detection enabled: Yes
BFD dual-active interface configured:
GigabitEthernet 1/0/1: UP
GigabitEthernet 2/0/2: UP
The following example displays the status of AP-based DAD.
Ruijie# show switch virtual dual-active aggregateport
Aggregateport dual-active detection enabled: Yes
Aggregateport dual-active interface configured: