Ruijie RG-S29 Series

Command Reference VSU Commands
AggregatePort 1: UP
GigabitEthernet 1/0/1: UP
GigabitEthernet 2/0/1: UP
GigabitEthernet 1/0/2: UP
GigabitEthernet 2/0/2: UP
DAD relay enable AP list:
AggregatePort 1
Related
Commands
Command
Description
dual-active detection
Enables DAD.
dual-active pair interface
Configures a DAD interface.
dual-active exclude interface
Configures an exclude interface.
Platform
Description
N/A
7.12 show switch virtual link
Use this command to display the status of a virtual switch link (VSL).
show switch virtual link [ port ]
Parameter
Description
Parameter
Description
port
Displays the port status of a VSL.
Defaults
N/A
Command Mode
Privileged EXEC mode
Usage Guide
N/A
Configuration
Examples
The following example displays VSL link information.
Ruijie# show switch virtual link
VSL-AP State Peer-VSL Rx Tx Uptime
-----------------------------------------------------------------------
-----------
1/1 UP 2/1 100000 100000 1d,4h,29m
2/1 UP 1/1 100000 100000 1d,4h,29m
The following example displays VSL port information.
Ruijie# show switch virtual link port
switch 1:
Port AP State Peer-port Rx Tx
Uptime