Ruijie RG-S29 Series

Command Reference VSU Commands
Examples
Ruijie(config)# switch virtual domain 1
Ruijie(config-vs-domain)# switch 1 renumber 2
The following example restores the ID of device 2 that is running to the default value in VSU
mode.
Ruijie(config)# switch virtual domain 1
Ruijie(config-vs-domain)# no switch 2
Related
Commands
Command
Description
switch
Modifies the device ID in standalone mode.
show switch virtual
Displays the domain ID as well as the ID and role of each chassis.
Platform
Description
N/A
7.22 switch virtual aggregateport lff enable
Use this command to enable the locally-preferred forwarding function on the AP in VSU mode.
Use the no form of this command to disable this function.
switch virtual aggregateport lff enable
no switch virtual aggregateport lff enable
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
This function is enabled by default.
Command Mode
config-vs-domain configuration mode
Usage Guide
N/A
Configuration
Examples
The following example enables the locally-preferred forwarding function on the AP in VSU mode.
Ruijie(config)# switch virtual domain 1
Ruijie(config-vs-domain)# switch virtual aggregateport lff enable
Related
Commands
Command
Description
show switch virtual balance
Displays the current traffic balancing mode.
Platform
Description
N/A