Ruijie RG-S29 Series

Command Reference VSU Commands
7.23 switch virtual domain
Use this command to modify the domain ID of a device in standalone mode, or enter
config-vs-domain configuration mode in VSU mode.
Use the no form of this command to restore the default setting.
switch virtual domain domain_id
no switch virtual domain
Parameter
Description
Parameter
Description
domain_id
Domain ID of the VSU, in the range from 1 to 255.
Defaults
The default is 100.
Command Mode
config-vs-domain configuration mode
Usage Guide
Only two devices with the same domain ID can form a virtual device. The domain ID must be
unique within the local area network (LAN).
Configuration
Examples
The following example sets the domain ID of the VSU to 1 in standalone mode.
Ruijie(config)# switch virtual domain 1
Ruijie(config-vs-domain)#
Related
Commands
Command
Description
show switch virtual
Displays the domain ID as well as the ID and role of each chassis.
switch domain
Modifies the domain ID in VSU mode.
Platform
Description
N/A
7.24 switch virtual ecmp lff enable
Use this command to enable the locally-preferred forwarding function on the ECMP interface in
VSU mode.
Use the no form of this command to disable this function.
switch virtual ecmp lff enable
no switch virtual ecmp lff enable
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
This function is enabled by default.
Command Mode
config-vs-domain configuration mode