Ruijie RG-S29 Series

Command Reference SNMP Commands
authentication failures.
process-mib-time
Displays the MIB node requiring the longest processing time.
Defaults
N/A
Command
mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
The example below displays the SNMP configuration:
Ruijie# show snmp
Chassis: 60FF60
0 SNMP packets input
0 Bad SNMP version errors
0 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
0 Number of requested variables
0 Number of altered variables
0 Get-request PDUs
0 Get-next PDUs
0 Set-request PDUs
0 SNMP packets output
0 Too big errors (Maximum packet size 1472)
0 No such name errors
0 Bad values errors
0 General errors
0 Response PDUs
0 Trap PDUs
SNMP global trap: disabled
SNMP logging: disabled
SNMP agent: enabled
Related
Commands
Command
Description
snmp-server chassis-id
Specifies the SNMP system sequence number.
Platform
Description
N/A
1.3 snmp trap link-status
Use this command to enable the interface to send link traps. Use the no form of this command to