Command Reference SNMP Commands
The following example configures the resend times of inform requests to 5.
Ruijie(config)# snmp-server inform retries 5
The following example configures the inform request timeout to 20 seconds.
Ruijie(config)# snmp-server inform timeout 20
1.12 snmp-server location
Use this command to set the system location string. Use the no form of this command to remove the
system location string.
snmp-server location text
String that describes the system location information.
No system location string is set by default.
Global configuration mode.
The following example sets the system location information:
Ruijie(config)# snmp-server location start-technology-city 4F of A Buliding
Sets the system contact information.
To Next Page
Loading...
