Ruijie RG-S29 Series

Command Reference SNMP Commands
1.13 snmp-server net-id
Use this command to configure the network element coding information of the device. Use the no
form of this command to remove the network element coding information.
snmp-server net-id text
no snmp-server net-id
Parameter
Description
Parameter
Description
text
Configures the network element coding information of the device. The
text length ranges from 1 to 255. The text is case-sensitive, and may
contain spaces.
Defaults
No network element coding information is configured by default.
Command
mode
Global configuration mode.
Usage Guide
N/A
Configuration
Examples
The following example configures the network element coding text to FZ_CDMA_MSC1.
Ruijie(config)# snmp-server net-id FZ_CDMA_MSC1
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
1.14 snmp-server packetsize
Use this command to specify the largest size of the SNMP packet. Use the no form of this command
to restore the default value.
snmp-server packetsize byte-count
no snmp-server packetsize
Parameter
Description
Parameter
Description
byte-count
Packet size. The range is from 484 to 17,876 bytes
Defaults
The default is 1,472 bytes.