Ruijie RG-S29 Series

Command Reference SNMP Commands
Related
Commands
Command
Description
snmp-server enable traps
Enables t the SNMP agent to send the SNMP
trap massage to NMS.
snmp-server host
Specifies the NMS host to send the SNMP trap
message.
Platform
Description
N/A
1.19 snmp-server trap-timeout
Use this command to define the retransmission timeout time of the SNMP trap message. Use the no
form of this command to restore the default value.
snmp-server trap-timeout seconds
no snmp-server trap-timeout
Parameter
Description
Parameter
Description
seconds
Timeout ( in seconds) of retransmit the SNMP trap message. The
range is from 1 to 1,000.
Defaults
The default is 30 seconds.
Command
mode
Global configuration mode.
Usage Guide
N/A
Configuration
Examples
The following example specifies the timeout period as 60 seconds.
Ruijie(config)# snmp-server trap-timeout 60
Related
Commands
Command
Description
snmp-server queue-length
Specifies the length of message queue for the
SNMP trap host.
snmp-server host
Specifies the NMS host to send the SNMP trap
message.
snmp-server trap-source
Specifies the source address of the SNMP trap
message.
Platform
N/A