Ruijie RG-S29 Series

Command Reference SNMP Commands
Description
1.20 snmp-server udp-port
Use this command to specify a port to receive SNMP packets. Use the no form of this command to
restore the default setting.
snmp-server udp port port-number
no snmp-server udp port
Parameter
Description
Parameter
Description
port-number
Specifies a port to receive the SNMP packets.
Defaults
The default is 161.
Command
mode
Global configuration mode.
Usage Guide
N/A
Configuration
Examples
The following example specifies port 15000 to receive the SNMP packets.
Ruijie(config)# snmp-server udp-port 15000
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
1.21 snmp-server user
Use this command to configure a new user to an SNMP group. Use the no form of this command to