Ruijie RG-S29 Series

Command Reference ERSPAN Commands
6 ERSPAN Commands
6.1 destination ip address
Use this command to configure the destination IP address for GRE encapsulation. Use the no form of
this command to delete the destination IP address.
destination ip address ip_address
no destination ip address
Parameter
Description
Parameter
Description
ip_address
The destination IP address of GRE encapsulation.
Defaults
N/A
Command
mode
ERSPAN configuration mode
Usage Guide
To return to privileged EXEC mode, enter the end command or the Ctrl-C key combination.
To return to global configuration mode, enter the exit command.
Configuration
Examples
The following example configures the destination IP address.
Ruijie(config)# monitor session 2 erspan-source
Ruijie(config-mon-erspan-src)destination ip address 10.1.1.2
Related
Commands
Command
Description
show monitor
Displays the mirror sessions.
Platform
Description
N/A
6.2 ip dscp
Use this command to configure the DSCP value of the IP packets. Use the no form of this command
to restore the default setting.
ip dscp dscp-value
no ip dscp
Parameter
Description
Parameter
Description
dscp-value
The DSCP value of the IP packets.