Ruijie RG-S29 Series

Command Reference ERSPAN Commands
Defaults
The default DSCP value is 0.
Command
mode
ERSPAN configuration mode
Usage Guide
To return to privileged EXEC mode, enter the end command or use the Ctrl-C key combination.
To return to global configuration mode, enter the exit command.
Configuration
Examples
The following example configures the DSCP value of the IP packets.
Ruijie(config)# monitor session 2 erspan-source
Ruijie(config-mon-erspan-src)#ip dscp 56
Related
Commands
Command
Description
show monitor
Displays the mirror sessions.
Platform
Description
N/A
6.3 ip ttl
Use this command to configure the TTL value of the IP packets. Use the no form of this command to
restore the default setting.
ip ttl ttl-value
no ip ttl
Parameter
Description
Parameter
Description
ttl-value
The TTL value of the IP packets.
Defaults
The default TTL value is 64.
Command
mode
ERSPAN configuration mode
Usage Guide
To return to privileged EXEC mode, enter the end command or use the Ctrl-C key combination.
To return to global configuration mode, enter the exit command.
Configuration
Examples
The following example configures the TTL value of IP packets.
Ruijie(config)# monitor session 2 erspan-source
Ruijie(config-mon-erspan-src)#ip ttl 65
Related
Command
Description