Command Reference ERSPAN Commands
The source IP address of GRE encapsulation.
ERSPAN configuration mode
To return to privileged EXEC mode, enter the end command or use the Ctrl-C key combination.
To return to global configuration mode, enter the exit command.
The following example configures the source IP address.
Ruijie(config)# monitor session 2 erspan-source
Ruijie(config-mon-erspan-src)origin ip address 11.1.1.2
Displays the mirror sessions.
Use this command to shut down the session. Use the no form of this command to restore the default
setting.
The ERSPAN session is enabled by default.
ERSPAN configuration mode
To return to privileged EXEC mode, enter the end command or the Ctrl-C key combination.
To return to global configuration mode, enter the exit command.
To Next Page
Loading...
Need help?
General