Command Reference Syslog Commands
8.28 logging statistic enable
Use this command to enable logging periodically. Use no form of this command to restore the default
setting.
no logging statistic enable
This function is disabled by default.
Global configuration mode
This command is used to send performance statistics at a certain interval for the server to monitor the
system performance.
The following example enables logging periodically.
Ruijie(config)# logging statistic enable
8.29 logging statistic interval
Use this command to configure the interval at which logs are sent. Use the no form of this command
to restore the default setting.
logging statistic mnemonic mnemonic interval minutes
no logging statistic mnemonic mnemonic
Sets the mnemonics to identify the object.
Sets the interval at which logs are sent, in the unit of minutes.
To Next Page
Loading...
Need help?
General