Command Reference Syslog Commands
Global configuration mode
The available settings include 0, 15, 30, 60 and 120. 0 indicates this function is disabled.
The following example set the interval at which logs are sent to 30 minutes.
Ruijie(config)# logging statistic mnemonic TUNNEL_STAT interval 30
8.30 logging statistic terminal
Use this command to enable logs to be sent to the console and the remote terminal periodically. Use
the no form of this command to restore the default setting.
logging statistic terminal
no logging statistic terminal
This function is disabled by default.
Global configuration mode
The following example enable logs to be sent to the console and the remote terminal.
Ruijie(config)# logging statistic terminal
To Next Page
Loading...
Need help?
General