Ruijie RG-S29 Series User Manual

Command Reference Syslog Commands
show logging
Displays basic configuration of log modules and
log information in the buffer.
clear logging
Clears the logs in the buffer.
Platform
Description
N/A
8.44 show logging reverse
Use this command to display configured parameters and statistics of logs and log messages in the
memory buffer at privileged user layer. The log messages are sorted by the timestamp from now to
before.
show logging reverse
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode
Usage Guide
Configuration
Examples
The following command displays the result of the show logging reverse command with RFC5424
format disabled.
Ruijie# show logging reverse
Syslog logging: enabled
Console logging: level debugging, 15495 messages logged
Monitor logging: level debugging, 0 messages logged
Buffer logging: level debugging, 15496 messages logged
Standard format: false
Timestamp debug messages: datetime
Timestamp log messages: datetime
Sequence-number log messages: enable
Sysname log messages: enable
Count log messages: enable
Trap logging: level informational, 15242 message lines logged,0 fail
logging to 202.101.11.22
logging to 192.168.200.112
Log Buffer (Total 131072 Bytes): have written 1336,
015492: *Sep 19 02:46:28: Ruijie %LINEPROTO-5-UPDOWN: Line protocol on
Interface FastEthernet 0/24, changed state to up.

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English