Ruijie RG-S29 Series

Command Reference Basic Configuration Management Commands
2.12 do telnet
Use this command to login to Telnet server.
do telnet host [ port ] [ /source { ip A.B.C.D | ipv6 X:X:X:X::X | interface interface-name } ]
Parameter
Description
Parameter
Description
host
IPv4, IPv6 or host name of Telnet server.
port
Configures TCP port ID. The default is 23.
/source
Specifies source IP or source port for Telnet client.
ip A.B.C.D
Specifies source IPv4 address for Telnet client.
ipv6 X:X:X:X::X
Specifies source IPv6 address for Telnet client.
interface interface-name
Specifies source port for Telnet client.
Defaults
N/A
Command
Mode
User EXEC mode/Privileged EXEC mode/Interface configuration mode
Usage Guide
N/A
Configuration
Examples
The following example configures destination IPv6 address 2AAA:BBBB::CCCC.
Ruijie(config)# do telnet 2AAA:BBBB::CCCC
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
2.13 enable
Use this command to enter privileged EXEC mode.
Enable [ privilege-level ]
Parameter
Description
Parameter
Description
privilege-level
Privilege level
Defaults
N/A
Command
User EXEC mode