Command Reference CWMP Commands
Global configuration mode
Use this command to enable or disable the CWMP function.
The following example disables the CWMP function.
Ruijie#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)#no cwmp
Ruijie(config)#
Displays the current configuration of CWMP.
Displays the running status of CWMP.
Use this command to disable the function of downloading main program and configuration files from
the ACS. Use the no form of this command to restore the default setting.
By default, the CPE can download main program and configuration files from the ACS.
The following example disables the function of downloading main program and configuration files
from the ACS.
To Next Page
Loading...
Need help?
General