Ruijie RG-S29 Series

Command Reference CWMP Commands
ACS.
Use the no form of this command to restore the default setting.
cpe username username
no cpe username
Parameter
Description
Parameter
Description
username
Configures the CPE username to be authenticated for the ACS to
connect to the CPE.
Defaults
N/A
Command
Mode
CWMP configuration mode
Usage Guide
Configures the CPE username to be authenticated for the ACS to connect to the CPE.
Configuration
Examples
The following example configures the CPE username to be authenticated for the ACS to connect to
the CPE to admin.
Ruijie#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)#cwmp
Ruijie(config-cwmp)#cpe username admin
Ruijie(config-cwmp)#
Related
Commands
Command
Description
show cwmp configuration
Displays the current configuration of CWMP.
show cwmp status
Displays the running status of CWMP.
cpe password
Configures the CPE password to be
authenticated for the ACS to connect to the
CPE.
Platform
Description
N/A
9.9 cwmp
Use this command to enable the CWMP function.
Use the no form of this command to disable this function.
cwmp
no cwmp
Parameter
Parameter
Description