Ruijie RG-S29 Series User Manual

Command Reference Interface Commands
on
Enables the flow control.
Defaults
This function is disabled by default.
Command
Mode
Interface configuration mode.
Usage Guide
Use the show interfaces command to display the flow control configuration.
Configuration
Examples
The following example enables flow control on fastEthernet port 1/1.
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# flowcontrol on
Related
Commands
Command
Description
show interfaces
Displays the interface information.
Platform
Description
N/A
1.11 interface
Use this command to enter the interface configuration mode.
interface interface-type interface-number
Parameter
Description
Parameter
Description
interface-type
The interface type.
interface-number
The interface ID.
Defaults
N/A
Command
Mode
Interface configuration mode
Usage Guide
This command is used to enter interface configuration mode. The user can modify the interface
configuration next,
Configuration
Examples
The following example enters configuration mode on Aggregateport 1.
Ruijie(config)# interface Aggregateport 1
Ruijie(config-if-Aggregateport 1)#
The following example enters configuration mode on GigabitEthernet 1/2.
Ruijie(config)# interface GigabitEthernet 1/2

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English