Ruijie RG-S29 Series

Command Reference Interface Commands
Description
1.20 protected-ports route-deny
Use this command to configure L3 routing between the protected ports. Use the no form of this
command to restore the default setting.
protected-ports route-deny
no protected-ports route-deny
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
This function is disabled by default..
Command
Mode
Global configuration mode.
Usage Guide
The ports that are set as the protected ports can route on L3. Use this command to deny the L3
communication between protected ports. Use the show running-config command to display
configuration.
Configuration
Examples
The following example configures L3 routing between the protected ports.
Ruijie(config)# protected-ports route-deny
Related
Commands
Command
Description
show running-config
Displays the protected ports route-deny
configuration.
Platform
Description
N/A
1.21 show eee interfaces status
Use this command to display interface EEE status.
show eee interfaces { interface-type interface-number | status }
Parameter
Description
Parameter
Description
interface-type
interface-number
Interface type and ID.
status
All interface EEE status.