Ruijie RG-S29 Series

Command Reference Interface Commands
N/A
N/A
Platform
Description
N/A
1.28 show interfaces usage
Use this command to display bandwidth usage of the interface.
show interfaces [ interface-type interface-number ] usage [ up | down ]
Parameter
Description
Parameter
Description
interface-type
interface-number
(Optional) The interface type and ID.
up
(Optional) Displays the port up statistics.
down
(Optional) Displays the port down statistics.
Defaults
N/A
Command
Mode
Any CLI mode
Usage Guide
If you do not specify an interface, the bandwidth usage of all interfaces is displayed. Bandwidth refers
to the actual link bandwidth rather than the bandwidth parameter configured on the interface.
Configuration
Examples
The following example displays bandwidth usage of interface GigabitEthernet 0/1.
Interface Bandwidth Average Usage Output Usage
Input Usage
---------------------------- ------------- ------------------
----------------- -----------------
GigabitEthernet 0/0 1000 Mbit 0.002822759% 0.001183280%
0.004462237%
Bandwidth refers to the interface link bandwidth, the maximum speed of link. Average Usage
refers to the current usage.
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A