Command Reference MAC Address Commands
The following example displays the static MAC addresses
Ruijie# show mac-address-table static
Vlan MAC Address Type Interface
---------- -------------------- -------- ---------
1 00d0.f800.1001 STATIC gigabitethernet 1/1
1 00d0.f800.1002 STATIC gigabitethernet 1/1
1 00d0.f800.1003 STATIC gigabitethernet 1/1
Configures the static MAC address.
2.19 show mac-address-table vlan
Use this command to display all addresses of the specified VLAN.
show mac-address-table vlan [ vlan-id ]
VLAN ID of the entry, within the range from 1 to 4094.
The following example displays all addresses of the specified VLAN.
Ruijie# show mac-address-table vlan 1
Vlan MAC Address Type Interface
----- ------------- ------- ------------------
1 00d0.f800.1001 STATIC gigabitethernet 1/1
1 00d0.f800.1002 STATIC gigabitethernet 1/1
1 00d0.f800.1003 STATIC gigabitethernet 1/1
show mac-address-table static
Displays static addresses.
show mac-address-table filtering
Displays filtered addresses.
show mac-address-table dynamic
Displays dynamic addresses.
show mac-address-table address
Displays all address information about the specified
address.