Ruijie RG-S29 Series

Command Reference MSTP Commands
N/A
N/A
Platform
Description
N/A
9.7 l2protocol-tunnel stp
Use this command to enable BPDU TUNNEL globally. Use the no form of this command to disable
this function.
l2protocol-tunnel stp
no l2protocol-tunnel stp
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
Mode
Global configuration mode
Usage Guide
If you want to BPDU TUNNEL globally, enable BPDU TUNNEL on the interface first.
Configuration
Examples
The following example enables BPDU TUNNEL globally.
Ruijie(config)# l2protocol-tunnel stp
Ruijie(config)# show l2protocol-tunnel stp
L2protocol-tunnel: stp Enable
L2protocol-tunnel destination mac address: 01d0.f800.0005
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
9.8 l2protocol-tunnel stp enable
Use this command to enable BPDU TUNNEL on the interface. Use the no form of this command to
disable this function.
l2protocol-tunnel stp enable
no l2protocol-tunnel stp enable