Ruijie RG-S29 Series

Command Reference MSTP Commands
Usage Guide
The available STP address includes 01d0.f800.0005, 011a.a900.0005, 010f.e200.0003,
0100.0ccd.cdd0, 0100.0ccd.cdd1, and 0100.0ccd.cdd2.
Configuration
Examples
The following example configures the STP address for transparent transmission through BPDU
TUNNEL.
Ruijie(config)# l2protocol-tunnel stp tunnel-dmac 011a.a900.0005
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
9.10 name
Use this command to set MST name. Use the no form of the command to restore the default setting.
name name
no name
Parameter
Description
Parameter
Description
name
MST name, up to 32 characters.
Defaults
The default is NULL.
Command
Mode
MST configuration mode
Usage Guide
name name: Sets the MST name, up to 32 characters.
show spanning-tree mst configuration: Displays MST region information.
Configuration
Examples
This example sets MST name to region1.
Ruijie(config)# spanning-tree mst configuration
Ruijie(config-mst)# name region1
Ruijie(config-mst)# show spanning-tree mst configuration
Multi spanning tree protocol : Enable
Name : region1
Revision : 0
Instance Vlans Mapped
-------- --------------------------------------------
0 : ALL
Ruijie(config-mst)# exit