Command Reference Basic Configuration Management Commands
Use this command to configure a password for line login, run the password command. Use the no
form of this command to restore the default setting.
password { [ 0 ] password | 7 encrypted-password }
Password for remote line login
The password is in plain text.
The password is encrypted.
The following example configures the line login password as "red".
Ruijie(config)# line vty 0
Ruijie(config-line)# password red
Moves from user EXEC mode to privileged
EXEC mode or enables a higher level of
authority.
Use this command to set the prompt command. Use the no form of this command to restore the
default setting.
To Next Page
Loading...
