Ruijie RG-S29 Series - Page 370

Command Reference MSTP Commands
receipt failure.
2. The loop guard function and root guard function cannot be enabled at the same time.
Configuration
Examples
The following example enables loop guard on interface Gi 0/1.
Ruijie(config)# interface gigabitethernet 0/1
Ruijie(config-if-interface-id)# spanning-tree guard loop
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
9.23 spanning-tree guard none
Use this command to disable guard on the interface. Use the no form of this command to enable this
function
spanning-tree guard none
no spanning-tree guard none
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
This function is enabled by default.
Command
Mode
Interface configuration mode.
Usage Guide
N/A
Configuration
Examples
The following example disables guard on interface Gi 0/1.
Ruijie(config)# interface gigabitethernet 0/1
Ruijie(config-if-interface-id)# spanning-tree guard none
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A