Command Reference MSTP Commands
The following example resets STP.
Ruijie(config)# spanning-tree reset
Displays the global STP configuration.
show spanning-tree interface
Displays the STP configuration of the interface.
9.40 spanning-tree tc-guard
Use this command to enable tc-guard on the interface to prevent the spread of TC messages. Use
the no form of this command to disable this function on the interface.
no spanning-tree tc-guard
This function is disabled by default.
Global configuration mode.
Enable TC guard to prevent TC packets from spreading
The following example enables tc-guard on the interface to prevent the spread of TC messages.
Ruijie(config)# spanning-tree tc-guard
9.41 spanning-tree tc-protection
Use this command to enable tc-protection globally. Use The no form of this command to disable this
To Next Page
Loading...
Need help?
General