Ruijie RG-S29 Series

Command Reference GVRP Commands
Related
Commands
Command
Description
show gvrp configuration
Displays the GVRP configuration.
Platform
Description
N/A
10.8 l2protocol-tunnel gvrp
Use this command to enable global GVRP PDUs TUNNEL globally. Use the no form of this command
to restore the default setting.
l2protocol-tunnel gvrp
no l2protocol-tunnel gvrp
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
This function is disabled by default.
Command
mode
Global configuration mode
Usage Guide
If you want to enable global GVRP PDUs TUNNEL, enable GVRP PDUs TUNNEL on the interface
first.
Configuration
Examples
The following example enables GVRP PDUs TUNNEL globally.
Ruijie(config)# l2protocol-tunnel gvrp
Ruijie(config)# show l2protocol-tunnel gvrp
L2protocol-tunnel: Gvrp Disable
L2protocol-tunnel destination mac address:01d0.f800.0006
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A