Ruijie RG-S29 Series User Manual

Command Reference GVRP Commands
10.9 l2protocol-tunnel gvrp enable
Use this command to enable GVRP PDUs TUNNEL on the interface. Use this command to restore
the default setting.
l2protocol-tunnel gvrp enable
no l2protocol-tunnel gvrp enable
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
This function is disabled by default.
Command
mode
Interface configuration mode
Usage Guide
If you want to enable global GVRP PDUs TUNNEL, enable GVRP PDUs TUNNEL on the interface
first.
Configuration
Examples
The following example enables GVRP PDUs TUNNEL on the interface.
Ruijie(config-if-interface-id)# l2protocol-tunnel gvrp enable
Ruijie(config-if-interface-id)# show l2protocol-tunnel gvrp
L2protocol-tunnel: Gvrp Disable
L2protocol-tunnel destination mac address:01d0.f800.0006
GigabitEthernet 0/1 l2protocol-tunnel gvrp enable
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
10.10 l2protocol-tunnel gvrp tunnel-dmac
Use this command to configure the MAC address for transparent transmission in GVRP PDUs
TUNNEL. Use the no form of this command to restore the default setting.
l2protocol-tunnel gvrp tunnel-dmac mac-address
no l2protocol-tunnel gvrp tunnel-dmac
Parameter
Description
Parameter
Description

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English