Ruijie RG-S29 Series

Command Reference Basic Configuration Management Commands
Defaults
N/A
Command
Mode
User EXEC mode
Usage Guide
N/A
Configuration
Examples
The following example configures the slave host to connect with the master host in VSU environment.
Ruijie# session master
The following example connects to device1 through session in VSU multiple-device environment
(box-type device).
Ruijie# session device 1
The following example connects to management module m1 of device1 through session in VSU
master-slave environment (card-type device).
Ruijie# session device 1 slot m1
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
2.37 session-timeout
Use this command to configure the session timeout for a remote terminal. Use the no form of this
command to restore the default setting and the session never expires.
session-timeout minutes [ output ]
no session-timeout
Parameter
Description
Parameter
Description
minutes
Timeout in minutes.
output
Regards data output as the input to determine whether the session
expires.
Defaults
The default timeout is 0.
Command
Mode
LINE configuration mode
Usage Guide
If no input or output in current LINE mode is found on the remote terminal for the session within a
specified time, this connection will expire, and this LINE will be restored to the free status.